搜索历史清除全部记录
最多显示8条历史搜索记录噢~
All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas

Operational Prohibitions for Wet-Spray Trolleys

Release time:

2026-05-28

Source:

Author:


Summary:

As a large-scale construction machinery, the wet‑spraying carriage must be operated in strict compliance with safety regulations. Understanding and eliminating hazardous operating practices is essential to preventing equipment damage and accidents. The following are the strictly prohibited operating procedures for wet‑spraying carriages.

I. Prohibitions Related to Equipment Startup and Shutdown

Initiate operational ban

Prohibited actions upon device startup:

1.  Operation of equipment by untrained personnel is prohibited.

2.  It is prohibited to forcibly start the equipment when its safety devices have failed.

3.  Operating equipment with faults is prohibited.

4.  Do not start the equipment without authorization during inspection and maintenance.

Shutdown Operation Ban

Prohibited actions during equipment shutdown:

Maintenance is prohibited while the equipment is in operation.

Abnormal shutdowns (direct power disconnection) are prohibited.

Do not dismantle piping when it is not depressurized.

It is prohibited to leave the operating station while the equipment has not come to a complete stop.

II. Prohibition on Pumping Operations

Pumping Operation Prohibition

Prohibited actions during the pumping process:

Operation at pressures exceeding the rated value is prohibited.

The use of non-conforming concrete is prohibited.

Forcing pumping when the pipe is blocked is prohibited.

Prohibit prolonged continuous operation at full load.

Equipment Status Monitoring Ban

Prohibited behaviors in operational monitoring:

1.  Do not ignore abnormal indications on the pressure gauge.

2.  Do not ignore abnormal equipment noises.

3.  Do not continue operation when the oil temperature is too high.

4.  Blocking alarm signals is prohibited.

III. Prohibitions on Boom Operation

Prohibition of Action Operations

Prohibited actions during boom operation:

Use of the boom beyond its rated working range is prohibited.

Prohibit rapid and forceful movements.

Do not extend the boom in high-wind conditions.

Lifting operations using the boom are prohibited.

Safety Zone Prohibition

Work Area Safety Prohibitions:

1.  Standing under the boom is prohibited.

2.  Do not operate when visibility is poor.

3.  Crossing barriers is prohibited during operations.

4.  Do not approach high-voltage power lines when working.

IV. Prohibition on Mobile Transfers

Driving Operation Prohibition

Prohibited actions when the equipment is being moved:

Driving is prohibited when the boom is not retracted.

Do not move the machine when the outriggers are not fully retracted.

Speeding is prohibited.

Do not move quickly on uneven surfaces.

Transition Preparation Prohibition

Prohibited behaviors during the transition:

1.  Transferring to another venue without completing a safety inspection is prohibited.

2.  Carrying unsecured tools during relocation is prohibited.

3.  Do not relocate the equipment immediately while it is still hot.

4.  Do not force a scene change when visibility is poor.

V. Maintenance and Servicing Prohibitions

Daily Maintenance Prohibition

Prohibited actions during maintenance and servicing:

The use of substandard fuels and spare parts is prohibited.

Do not add grease while the equipment is running.

Unauthorized modification of device parameters is prohibited.

Do not use damaged tools for repairs.

Electrical Maintenance Prohibition

Electrical System Maintenance Prohibition:

1.  It is prohibited to perform maintenance on electrical equipment while it is energized.

2.  Do not modify the control wiring at will.

3.  The use of non‑compliant fuses is prohibited.

4.  Do not service electrical systems in wet conditions.

VI. Safety and Security Prohibitions

Personal Protective Equipment Ban

Personnel Safety Protection Prohibition:

Operation is prohibited without the use of personal protective equipment.

Operating equipment in slippers or barefoot is prohibited.

Operating equipment while fatigued is prohibited.

Using mobile phones during operation is prohibited.

Work Environment Prohibition

Workplace Safety Prohibition:

1.  Work is prohibited when lighting is insufficient.

2.  Open-air operations are prohibited during thunderstorms.

3.  Work is prohibited in flammable and explosive environments.

4.  Work is prohibited in areas without warning signs.

VII. Emergency Response Prohibitions

Prohibition on Fault Handling

Prohibited actions during fault handling:

It is prohibited to perform any unauthorized repairs before the cause of the fault has been identified.

Do not use inappropriate tools for repairs.

Maintenance is prohibited when the equipment has not come to a complete stop.

It is prohibited to continue using equipment while concealing malfunctions.

Accident Handling Prohibition

Accident Response Prohibition:

1.  It is prohibited to tamper with the accident scene.

2.  It is prohibited to conceal the truth about an accident.

3.  It is prohibited to resume operations before hazards have been eliminated.

4.  Personnel without proper training are prohibited from participating in rescue operations.

Conclusion

The safe operation of wet‑spraying rigs is critical to both personnel safety and equipment integrity. By clearly defining prohibited operations, establishing rigorous operating procedures, and strengthening staff training and management, accidents can be effectively prevented. It is recommended to develop a comprehensive manual of operational prohibitions, enhance routine inspections and oversight, and institute an accountability system to ensure that all restrictions are strictly enforced. At the same time, emphasis should be placed on fostering safety awareness, enabling operators to voluntarily adhere to established procedures and thereby providing robust assurance for the safe and reliable operation of the equipment.